Abstract. The paper considers the application of the method of moments to determine the field radiated by an active metasurface. Compared to the classical method of moments, the authors use its modification, supplemented by the method of conformal mapping. This allows finding the field generated by the sources of the active metasurface in its near zone, where other elements that form the metasurface are located: metaconductors and a dielectric substrate. To apply the method of moments, the authors use the Pucklington integral equations,
representing metaconductors as cylinders with a radius that is much smaller than the length of the cylinders. The proposed method investigated an active metasurface with a current source that provides a sinusoidal distribution law on the back side of the substrate. Such a source creates a plane wave field in the near zone. On the other side of the metasurface, parallel metaconductors are placed with the same distance between them. As a result of the conducted research, it was found that the far-field radiation pattern has a resonant plane that is perpendicular to the metaconductors. It was also shown that the number of resonant peaks in the radiation pattern is determined by the number of conductors, and their shape and angular distance between them can be changed by changing the distance between the metaconductors. The conducted research can be used in high-precision biomedical devices designed to determine the properties of biological substances structurally embedded in the metastructure