The work investigates metasurfaces that have the property of frequency selectivity at microwave frequencies. To conduct the research, the Floquet method is used for two modes of the incident wave: transverse electric (TE) and transverse magnetic (TM) polarizations, which is implemented in the HFSS software environment developed by ANSOFT, for which the non-commercial version of this software product is used. Metasurfaces with cells of three different types are investigated: with solid squares of conductive material in the middle of the cell, with a square aperture in the middle of the cells, and with a circular aperture in the middle of the cell. The basis of all the studied structures is a dielectric substrate made of a material with a dielectric constant of 2.2, the thickness of the substrates are 3 mm and 5 mm, the size of the cells varied from 1 cm to 10 cm. The choice of such sizes is due to the practical application: metasurfaces with sizes from 1 cm to 3 cm can be used as a frequency-selective surface of miniaturized IoT devices, micro-wave MIMO antenna arrays for electromagnetic shielding between individual elements of the array. Larger cells from 3 cm to 10 cm can be used as protective screens of integrated electromagnetic protection systems of larger sizes, as well as in systems that will provide external electromagnetic radiation for the accumulation and conversion of electromagnetic energy with the purpose of providing autonomous power supply of electrical circuits of IoT devices. Studies have also been conducted on the influence
of the cell surface filling factor with a conductor on the value of the maximum transmittance, which can be provided by a surface of two types: with inclusions in the form of squares and with inclusions in the form of a frame. The conducted studies can serve as the basis for the development of a metasurface with specified frequency characteristics.
Keywords: IoT net, 6G, metamaterials, frequency selective surfaces, mathematical simulation.